Industrial Internet of Things

RST Device

AmbiPower’s RST Device is used for monitoring of IT rack and RTU along with remote reset function with SMS/e-mail alerts. The device restart features shall be through LAN as well as dual SIM cards. The solution shall be able to capture ambient temperature of the IT rack and provide real time reports on the working condition of the routers. The solution shall be able to rest the power supply circuit of IT rack and RTU through SMS as well as LAN.

Features Hardware:


Processor

Processor

CPU: 32 bit High Speed ARM Cortex A7/A8
Speed: Cortex A7 @ 900MHz* or Cortex A8 @1GHz*
* Subject to change at the time of designing


Operating System

Operating System

Linux v2* or Linux v3*
* Subject to change at the time of designing


Memory:

Memory:

RAM: 256MB/512MB
Memory: Up to 16GB


Software Protocol Support:

  • MODBUS over RS485 (Qty: 2)
  • IEC60870-5-104 (SCADA) over RJ45 (Qty: 1)

 

Interfaces:

  • Digital Inputs: 5
  • Digital Outputs: 3
    • Relays will be connected to 2 outputs, one for 5A rating and one for 10A rating
  • Analog Inputs: 2
    • Temperature Sensor compatible with 4-20mA can be connected

 

Connectivity:

  • LAN (RJ45)
  • RS485 (For energy meter or relay connectivity)

 

Remote Connectivity Features:

  • 4G LTE
  • NB-IoT
  • GSM/GPRS

 

All connectivity options will offer:

  • Internal Antenna Connector
  • Dual SIM slot access

 

Application Platform:

Grid Router Monitoring solution should include the following features:

  • Device Registration & Management
  • SMS and e-mail configuration up to 20 users with access permissions
  • Alert settings and management
  • SMS and e-mail alerts along with timestamp for
    • Power-ON/OFF
    • Temperature threshold violation
    • Reset event using command through SMS and LAN.
    • Device health status every 30 minutes
      • MIS Reports
      • All historic alerts
    • All reset events along with the stakeholder details who initiated it

 

Data backup:

  • Up to 2 days in the on-board memory
  • Data will be purged after sending it to the SCADA system from the RST’s internal memory

 

Power:
  • Single Phase 85-265VAC @ 50/60Hz universal input
  • Battery powered with charger for up to 2 hours with minimal functionality.

 

Miscellaneous Features:

  • LEDs (power, network connectivity)
  • Reset Button

 

Enclosure:

  • Enclosure rating will be IP65
    • TBD
  • Mounting shall be Back plate / DIN Rail type
    • TBD
  • IP Rating shall be minimum IP 40
  • Operating Temperature 0 to 600C

 

Download RST Device Brochure