Design by Technology

Home / Design / Design by Technology / Machine 2 Machine (M2M)

Machine 2 Machine (M2M)

AmbiPower – Giving Power Back in The Hands of The Utilities

AmbiPower

Ambimat’s AmbiPower is an Automatic Meter reader which communicates with a Utility meter (Water/Gas/Energy) and a Head End System over a cellular network. The modem is capable to independently sending commands over DLMS (RS232) to the meter. The AmbiPower uses a proprietary Edge computing algorithm that can parse the meter data locally on the device itself. This feature helps utilities to bring down the data usage i.e. running cost paid to cellular networks as well as increases the reliability of meter communication. The modem can also sending specific SMS based on some pre-defined events detected from the meter. This provides greater flexibility to use the modem for not just data monitoring but also remote surveillance of tampering activities.
 

AMR Features:

 

  • Meter connectivity over IEC62056(2011):DLMS/COSEM
  • Scheduled data reading from the meter.
  • Can read instantaneous as well as long term data reading from the meter.
  • Can connect to all major Head End Systems
  • Small Form Factor
  • Can work as a Router for a plug and play experience
  • External Antenna for ease of use for cellular connectivity.
  • Can work on 1-ph and 3-ph inputs
  • Low installation cost

 

Generic Modem Features:

 

  • Network Status Indication via LED
  • Power Supply Status via LED

 

Electrical Features:

 

  • 3 Ph (3X240 VAC @ 50Hz)
  • 1 Ph (1X240 VAC @ 50Hz)
  • EFT protection (According to IEC 61000-4-4)
  • Surge Protection(6kV as per IEC 61000-4-5)

 

Connectivity features:

 

  • Supports Cellular connectivity over:
    4G networks (including NB-IoT)
    GSM/GPRS networks
  • Features end-to-end trusted domain security
  • Provides signal optimization and congestion control

 

LTE bands and connectivity from ISP:

 

  • Supports LTE Bands 3,7 and 20.
  • Works across all major mobile service providers:Jio,Airtel,Vodafone-Idea
  • All channel bandwidths:1.4 – 20MHz

 

SMS:

 

  • SMS MT/MO PDU/Text mode – For respecified events

 

Protocols supported for Data transmission:

 

  • Duals tack IPv4/IPv6
  • Embedded TCP/IP,UDP/IP

 

Security/Robustness:

 

  • Transport layer security (TLS1.2)

 

Optional Features:

 

  • Supports on-board memory for storing data if network is not available
  • Bartery backup in times of power outage (for indication purposes only)-Available in Selected variants only
  • On board GPS for GIS applications
  • GNSS Support:
    GNSS receiver 72-channel u-blox 8 engine GPS/QZSS L1 C/A
    Assistance GNSS:AssistNow Online AssistNow OfflineOMA SUPL & 3GPP compliant
    Acquisition Cold:30s/ Aided:3s/ Reacquisition:1s
    Max nav. update rate:Up to 10 Hz
    CellLocate® Cell tower location data to supplement positioning receiver data

 


Download AmbiPower Brochure


HVAC (Heating ventilation and air conditioning)

AmbiAutomation

The Ambimat Electronics’s AmbiAutomation HVAC Bridge Board is designed and developed a device which is able to communicate on BACnet or MODBUS protocols with Building Automation devices like Chillers, VRVs, VAVs etc and monitor the vitals of the building network for preventive care and maintenance
 

Features:

 

  • Compact Size
  • Built in RTC
  • DHCP and Static IP support
  • Configurable baud rate, parity and stop bits for RS485
  • Complete isolation for RS485 and RJ45 connectors
  • Out-of-the-box GPRS/CAT 1/NB-IoT connectivity so no hassles with Building’s existing IT infrastructure

 

Applications:

 

  • Building management
  • Energy management
  • Preventive maintenance

 

Data Interfaces supports:

 

  • RS232
  • RS485
  • Ethernet
  • Wi-Fi

 

Protocols supports:

 

  • BACnet IP
  • MODBUS RTU
  • Proprietary RS232 communication
  • JSON/HTTP

 

Data Communication Protocol to backend server:

 

  • Wi-Fi
  • Ethernet
  • GPRS/CAT 1/NB-IoT All communications will go over an encrypted channel to the server*

 

Power Supply:

 

  • 8-26VAC, 50/60Hz from the controls panel
  • <500mA of current draw
  • 12VDC with power adapter (available/optional)

 

Ethernet Interface:

 

  • Connector: 8-pin RJ-45 socket for Cat 5 UT
  • Physical and Data Link: IEEE 802.3i 10/100 BASE
  • Isolation: 1.5 kV galvanic
  • Number of devices: >1
  • Maximum Cable Length: 100m/328ft
  • Protocols: JSON, HTTP, BACnet IP,MODBUS TCP/IP

 

Serial Port (RS485/RS232) Interface:

 

  • Connector: 5.08mm 2 port terminal block
  • Physical Layer: EIA-485-A, 2-wire
  • Isolation: 15kV
  • Maximum number of nodes: 64
  • Baud Rate: 2400, 4800, 9600, 19200, 57600, 115200 bps
  • Protocols: MODBUS RTU

 

GPRS:

 

  • Quadband GPRS: (850/900/1800/1900 Mhz)
  • Antenna: External, Omnidirectional. Should be placed outside the enclosure for better reception
  • Connectivity: Internal module with an on-board SIM slot
  • CAT 1: Bands 3, 7, 20 and 21.
    Supports Reliance Jio, Airtel, Vodafone, Idea networks
  • Supports NB/IoT

 

User Interface Monitoring:

 

  • Web browser and mobile application
  • Indications on LEDs for status of device LED Indications: Power (RED), Ethernet link (orange and green),GPRS connectivity (Red/Green)

 

Enclosure Options:

 

  • IP65

 


Download HVAC Brochure